for Steam Use
Solutions for Steam Use
Type Steam 4
The S&E Type Steam 4 is a 2 sided enclosure suitable upto 2.2 m high. The inline panel is L shaped creating a one piece bulkhead that wraps over the top of the door and is UV bonded to the return. A stud bulkhead is required to be built down in preparation for the frameless glass. Other configurations of this solution are shown further down in the overview section. Please always ask for technical advice when planning a steam shower.
Solutions for Steam Use
The steam shower shown in the picture is a 2 sided enclosure suitable up to 2.5 m high thanks to it’s separate bulkhead which allows the door to remain at 2 m high but still achieving the elevation required.
A stud bulkhead is required to be built down in preparation for the frameless glass. This configuration is made up of Type 7 PDP + SP2. Please always ask for technical advice when planning a steam shower.
The S&E fixed panel concept is that we allways bespoke to suit your environment, personalising to the smallest details thus achieving an uncompromised finish and sence of imagination every time you admire it, transforming the most simple of ideas into an individual statement in the bathroom. This section takes you through some case studies that […]
The S&E shower Type 1 is a turning door linked to the right or left and side of the shower niche. The door is linked with 180° hinges and opens to the inside or outside. The Type 1 assembly includes the clear glass door with 2 hinges and one handle in glossy chrome finish plus all required […]
The S&E Type 5 consists of a pivot door and a fixed partition which are attached to the wall. The door opens outwards and can be mounted at the left or right hand side. The Type 5 standard configuration is a pivot door and a side partition in clear glass, two 180° hinges, two wall […]
The S&E Type 11 and Type 12 (photo) are both quarter round circle showers. The doors are attached to the side panels. The S&E Type 11 and Type 12 can be delivered with door radius’ of 50, 57.5 or 70cm All glass screens in clear glass. The 180 degree hinges, four wall brackets and the door […]
The S&E Type 15 for bath tubs consists of one pivot door which can be fitted left or right hand side and can be opened inwards or outwards. The standard configuration of S&E Type 15 consists of a pivot door in clear glass and two hinges made in shiny chrome finish. The kit also […]
The S&E Type S1 is a niche solution consisting of a sliding door, which is being slid behind a stationary in line side panel. This frameless structure with a runway rail made of polished stainless steal requires no side or lower guide rails. The S&E Type S1 assembly includes the clear glass sliding door, one […]
Solutions with Dwarf Return
The S&E Type B3 is a two sided corner solution next to a bath tub. This space saving design includes a side panel that is able to sit directly on the tub edge eliminating the ‘requirement’ to build a dwarf wall. Other configurations of this solution are shown on page 88. The Type B3 […]
for Steam Use
The S&E Type Steam 4 is a 2 sided enclosure suitable upto 2.2 m high. The inline panel is L shaped creating a one piece bulkhead that wraps over the top of the door and is UV bonded to the return. A stud bulkhead is required to be built down in preparation for the frameless glass. Other […]
Glass Design Unlimited
S&E glass partitions are made to measure so that they fit 100 % to your rooms and facilities. Don´t keep to any standards which might restrict the planning and design of your bathroom. We manufacture to your individual ideas with top design and unmatched quality. Due to the excellent quality and robustness of the S&E hinges […]