S&E Glassdesign

Portfolio

Corners
90°-Solutions

90°-Solutions

Type 5

S&E_Glasdesign_Website_Content_960px_Ecken_1

The S&E Type 5 consists of a pivot door and a fixed partition which are attached to the wall. The door opens outwards and can be mounted at the left or right hand side.

The Type 5 standard configuration is a pivot door and a side partition in clear glass, two 180° hinges, two wall brackets and a door handle all in shiny chrome finish. All required profiles are included as well.

90°-Solutions

Type 6

S&E_Glasdesign_Website_Content_960px_Ecken_2

 

The S&E Type 6 is a corner solution with a pivot door mounted to the wall, a fixed partition with a side panel attached right- angled. The door can be mounted left or right and opens inwards or outwards optionally.

The standard configuration of Type 6 is a door, partition and side panel, two 180° hinges, two wall brackets, two 90° glass to glass connecting brackets and a door handle in chrome finish. All required profiles are included as well.

90°-Solutions

Type 7_inline

S&E_Glasdesign_Website_Content_960px_Ecken_3

 

The S&E Type 7 is a corner solution with a pivot door mounted to a side panel and a fixed partition at a right angle. The door can be mounted left or right, opens outwards and is stabilized by a bar.

The standard configuration of Type 7 is a door, partition and side panel, two 180° hinges, four wall brackets and a door handle shiny chrome finish. All required profiles are included as well.

90°-Solutions

Type 8

S&E_Glasdesign_Website_Content_960px_Ecken_Typ8

 

The S&E Type 8 is for corners with pivot door mounted to the fixed partition at a right angle and a side panel. The door can be mounted left or right and opens inwards or outwards. The partition is stabilised by bar parallel to the door and the side panel.

The picture above shows a S&E Type 8 with an additional fixed side panel making it a free standing, three sided solutions.

90°-Solutions

Type 9

S&E_Glasdesign_Website_Content_960px_Ecken_5

 

The S&E Type 9 is  a corner solution with two pivot doors, one mounted to the fixed partition at a right angle and the other one to the wall. The doors can opened inwards and outwards. The partition is stabilised by a bar parallel to the doors.

The photo above shows a S&E Type 9 special, which is a three sided, free standing shower partition consisting of two pivot doors wich are both attached to side panels at a right angle. The doors can be opened inwards and outwards, the side panels are stabilised by a bar parallel to the doors.

90°-Solutions

Type 10

S&E_Glasdesign_Website_Content_960px_Ecken_6

 

The S&E Type 10 is a corner solution with two pivot doors in a right angle wich are attached to fixed side panels each. The doors can be opened outwards only. Each side panel is stabilised by a bar. Optional are hinges which allow the doors and side panels to be inline (see picture above right).

All glass screens are made of ESG clear glass. The four hinges, four wall brackets, door handles and the stabiliser bar are made in shiny chrome finish. The kit also includes all required profiles.

Overview

Overview_Corners

These were our solutions for corner situations.

Which shower partitions do you want to see next?

S&E Glasdesign

Shower Partitions